Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 ; Prinergy Direct 2.0 ; Prinergy Access 2.0 ; Prinergy PowerPack 1.0 ; Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
The CEPS JTP cannot process a CT/LW set if the .assg file is missing. |
|
|
|
||
Cause |
Because it’s hidden on the Mac, this file sometimes gets misplaced. | |
|
|
||
Solution |
You can reunite orphaned LWs and CTs using PressTouch. It takes a few steps to put it back into “page context� (.p), but the resulting page works through the CEPS JTP. The procedure is as follows: 1. Open the LW in PressTouch. 2. In the “CTs� palette, click the new button (bottom of palette). Add the desired CT. 3. The new CT will have a color of “0�. Click the “0�, which brings up a new window. 4. Click the Assign button (pointer becomes an eye dropper). Click to a “gray� part of the LW data that you know the CT is supposed to show through. 5. Save as a Page, then bring the resulting page into Prinergy via the CEPS JTP. 6. Check your output results carefully to ensure that the page is as you expect. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
CT-LW Import |
|
|
|
||
Technical contact(s) |
James Bredenhof |
|
Submitted by |
James Bredenhof |
|
Date submitted |
22 Sept 2003 |
|