Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 ; Prinergy Direct 2.0 ; Prinergy Access 2.0 ; Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 ; Prinergy Satellite | |
Platform |
||
Operating system |
||
|
|
||
Error |
"Typecheck; OffendingCommand: if" |
|
|
|
||
Symptoms |
QuarkXPress 6.1 PostScript files fail and report PostScript error. |
|
|
|
||
Cause |
QuarkXPress 6.0 files used to fail and report error: "invalidrestore; OffendingCommand: restore ". This problem was fixed in Prinergy 2.1.0.21 and 2.2.1.3. Unfortunately, QuarkXPress 6.1 changed the PostScript output once again, which results in a "Typecheck; OffendingCommand: if" or other error. | |
|
|
||
Solution |
1. Disable the Distiller Assistant and pre-Distill the QuarkXPress PostScript, then bring the resulting PDF into Prinergy. 2. Export as PDF from QuarkXPress using DeviceN. This issue is fixed in 2.2.1.7 Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
normalizer, PostScript, Quark |
|
|
|
||
Technical contact(s) |
James Bredenhof |
|
Submitted by |
James Bredenhof |
|
Date submitted |
18 Feb 2004 |
|