Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy 2.3.1.5 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
On output, 100% K vector objects are not touched by the color engine. Therefore, the object retains a 100% K build on output. This is often a favourable result in separated output (plates and dot proof), but may not be desired on composite digital inkjet proofers where the black hue of the source (simulation space) is required to be mapped to the destination space. |
|
|
|
||
Cause |
Raster Overprint Handling not enabled in Color Convert section of the Process Template. | |
|
|
||
Solution |
Enable Raster Overprint Handling in the Color Convert section of the Process Template. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
color, output, process plans |
|
|
|
||
Technical contact(s) |
Ken Lew |
|
Submitted by |
David Herder |
|
Date submitted |
08 Dec 2006 |
|