Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
None. |
|
|
|
||
Symptoms |
Copydot data in file gets downsampled to 300 dpi from 2400 or 2540 dpi. |
|
|
|
||
Cause |
The Eskofot images are composite 1-bit, pixel-interleaved, CMYK colorspace images. Unfortunately the Optimizer, if you enable Resample for Color Images, actually converts the 1-bit images into 8-bit images (at 300 dpi by default). Consequently, by the time the Copydot JTP sees the image it has already been converted and is ignored as a contone image. | |
|
|
||
Solution |
Use a separated Eskofot format if it is available. This would be much more efficient in any case. If you are using composite Eskofot format, you should create a special process plan with Resample DISABLED for Color Images on the Optimizer settings. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
Copydot, file formats |
|
|
|
||
Technical contact(s) |
Ken Lew |
|
Submitted by |
Ken Lew |
|
Date submitted |
22 May 2003 |
|