Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 ; Prinergy Satellite | |
Platform |
||
Operating system |
||
|
|
||
Error |
None. |
|
|
|
||
Symptoms |
Toggling the "enabled/name" box on and off in Harmony has no effect on the drop-down list of available curves in Workshop's Process Plan editor. |
|
|
|
||
Cause |
Enabling or disabling Harmony curves will not affect the selection list in Process Plan editor (all curves will be displayed). Enabling a Harmony curve allows the %Auto% setting to choose from the set of curves enabled. You can still choose a curve explicitly. | |
|
|
||
Solution |
Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
dot-gain calibration, Harmony, JTP, pped, process plans |
|
|
|
||
Technical contact(s) |
Ken Lew |
|
Submitted by |
Ken Lew |
|
Date submitted |
06 Oct 2003 |
|