Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 ; Prinergy Satellite; Prinergy 2.2 | |
Platform |
||
Operating system |
||
|
|
||
Error |
None. |
|
|
|
||
Symptoms |
At 150 lpi and higher, diagonal lines that look like moire but are visible on individual film separations will be visible. Although visible on film, the artifact does not show up on press. |
|
|
|
||
Cause |
With most imagesetters, there will be a possible interaction between the opto-mechanical system and the screening system that causes a visible artifact. | |
|
|
||
Solution |
For now, you need to use a PS/M which has a TSP board that will mimize the artifact. In the future, we will be implementing TSP screening into Prinergy. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
film, Imagesetter, screening |
|
|
|
||
Technical contact(s) |
Ken Lew |
|
Submitted by |
Ken Lew |
|
Date submitted |
09 Dec 2003 |
|