Product

Platform

Operating system

Error

None.

Symptoms

A crosshatch pattern may be visible on some separations, depending on the screen angle, spot function, and tint value.

Cause

Solution

In Prinergy 2.1 and later, the workaround is:

1. Select 138 lpi (by typing it in) instead of 150 lpi.

2. Select a Round-Square (Euclidean) dot rather than a Round dot.

.

The difference in actual ruling on the plate is negligible, because 150 lpi actual results in screens that are about 141 lpi.

Permanent fix:

See also

Keywords

output, RIP, screening

Technical contact(s)

Ken Lew

Submitted by

Ken Lew

Date submitted

19 Jan 2004