Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.0 | |
Platform |
Server: Dell all; Client: PC or Macintosh |
|
Operating system |
Server: Windows 2000; Client: Windows or Macintosh |
|
|
|
||
Error |
||
|
|
||
Symptoms |
***Applies to Prinergy Connect, Powerpack, Direct, Satellite, depending on installed configuration.*** When restarting a Prinergy server that connects to the Faststor tape library, it takes a very long time (possibly 2-3 minutes) to log on to the system. |
|
|
|
||
Cause |
After the server is restarted, the ADIC Door Monitor service that runs on the Prinergy server waits for the tape library to perform an inventory. This causes a delay in the Windows startup. | |
|
|
||
Solution |
There is no solution needed, this behaviour is expected. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
networking, tape libraries |
|
|
|
||
Technical contact(s) |
Amy Chan |
|
Submitted by |
Amy Chan |
|
Date submitted |
||