Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy PowerPack 1.0 Level Any; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
The mark representing the dielines that is generated by Pandora and SignaPack does not fall in the correct position on a layout proof when the "Reduce to fit Media" option is used. Mark looks correct in VPS, but not on the layout proof. |
|
|
|
||
Cause |
The mark is getting scaled at a different percentage than the other marks and the artwork PDFs when the Reduce to Fit option is used. | |
|
|
||
Solution |
Instead of using the "Reduce to Fit" option in the layout tab in the Process Plan, calculate the desired scaling percentage and enter it in the Vector Scaling section of the Layout tab of the Process Plan. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
imposition [layout], Pandora, Powerpack, proofing, Signastation-Signapack |
|
|
|
||
Technical contact(s) |
Rob Morgan |
|
Submitted by |
Rob Morgan |
|
Date submitted |
14/03/2003 |
|