Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 Level 15 & up; Prinergy Access 2.1 Level 15 & up; Prinergy Powerpack 2.1 Level 15 & up; Prinergy Satellite | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
Objects deleted in a trapped PDF by PitStop come back into the file after Heidelberg traps are removed by the Creo PDF Trapper |
|
|
|
||
Cause |
This is expected behavior. The action of removing Heidelberg traps by the Creo Trapper restores the original page contents of the PDF from the time before the page was originally trapped with the Heidelberg trapper. If you remove objects from a trapped page and then delete the traps (in that order) the removed objects will come back. |
|
|
|
||
Solution |
Delete any traps before using PitStop to delete objects on the page. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
Creo PDF trapper, OEM trapper, trapping |
|
|
|
||
Technical contact(s) |
Rob Morgan |
|
Submitted by |
Rob Morgan |
|
Date submitted |
28 Aug 2003 |
|