Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
A shift is applied to the assigned subpage to align the lower left corner of the trim box with the lower left corner of the imposition plan. The way this shift is calculated is different in Prinergy 2.1 and Prinergy 2.0.7, resulting in different output between the two versions of Prinergy. |
|
|
|
||
Cause |
||
|
|
||
Solution |
1. Distill the PS without Prinergy Distiller Plug-in, then refine. 2. Change the geometry using geometry editor and re-refine (not an option if you are using Prinergy Direct). Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
Geometry, output, PDF |
|
|
|
||
Technical contact(s) |
James Bredenhof |
|
Submitted by |
James Bredenhof |
|
Date submitted |
18 Feb 2003 |
|