Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
||
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
These error messages relating to Navisphere appear in the NT Event log: The description for Event ID (1) in Source (Navimon) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Navisphere Event Monitor application starting up. The description for Event ID (1) in Source (Navimon) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Configuration Open File Failed. The description for Event ID (1) in Source (Navimon) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Navisphere Event Monitor application shutting down. |
|
|
|
||
Cause |
These are messages from the Navisphere Event Monitor. The Navisphere Event Monitor is used to send messages to the NT Event Log from the Clariion RAID. The monitor is dependent upon the SCSI port number assigned to the SCSI card. If an additional SCSI card is installed, the Event Monitor will generate error messages because it may be monitoring the wrong SCSI card unless the monitor is reconfigured to monitor the new port. For this reason, we do not install the Navisphere Event Monitor application. |
|
|
|
||
Solution |
Remove the Navisphere Event Monitor from the system. If you wish to check the RAID logs with a Navisphere utility, use Navisphere Supervisor. To remove the Navisphere Event Monitor do the following: 1) Stop the Navisphere Event Monitor service from Control Panel | Services. 2) Remove the Navisphere Event Monitor software from Control Panel | Add/Remove Software. 3) In Regedt32, go to HKLM\System\CurrentControlSet\Services and remove the NavisphereEventMonitor registry key. 4) Reboot the server. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
RAID, Windows 2000, Windows NT |
|
|
|
||
Technical contact(s) |
Stan Yoshida |
|
Submitted by |
Stan Yoshida |
|
Date submitted |
||