Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
|
|
||
Product |
Prinergy Connect 2.1 ; Prinergy Direct 2.1 ; Prinergy Access 2.1 ; Prinergy Powerpack 2.1 | |
Platform |
||
Operating system |
||
|
|
||
Error |
||
|
|
||
Symptoms |
Some screens such as IS, Diamond, MaxTone, or Megadot do not show up in the Screening Systems list in Dotshop Composer. |
|
|
|
||
Cause |
A JTP with those screens enabled must be installed on the system. Dotshop Composer will only get the list of screens from one of the JTP's. | |
|
|
||
Solution |
If you only see Creosettes, and Staccato screens then you will have to create a 512 MB JTP on the system if you wish to see the other screens in Dotshop Composer. If you only see Creosettes, HQS, RT and Staccato screens, enable the other screens on the 512 MB JTPs and run Dotshop Composer. After the .sif file is created, reset the screens for the JTP's. Permanent fix: |
|
|
|
||
See also |
||
|
|
||
Keywords |
Dotshop, screening |
|
|
|
||
Technical contact(s) |
Stan Yoshida |
|
Submitted by |
Stan Yoshida |
|
Date submitted |
30 Oct 2002 |
|