Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Prinergy Evo Connectivity - Agfa

This page contains set up and configuration instructions specific to your Prinergy Evo to Agfa proofing device workflow, preconfigured process templates for your Agfa devices and additional notes, comments, and tips.

Connectivity documentation | Process Templates and Notes | Known Limitations | Resources

Connectivity documentation

Process Templates and Notes

 
Known Limits
Device models
Date tested
Tester
Evo version
Device RIP
RIP OS
Process Template
Notes
 
Agfa Sherpa 43 April 2004 Josh Garrett 1.1.0.4 N/A Windows 2000 Server OutputPDF-Sherpa43-360.tpl Prinergy Evo Connectivity to the Agfa Sherpa Printer
  1. Ensure you have set up a shared TCP/IP port.
  2. Ensure Agfa Sherpa 43 is configured as a shared network printer.
  3. In Prinergy Evo, Process Template Editor dialog box, open this process template.

  4. In the Processed File Preference section, select Send Processed Files to check box.

  5. In the Device Path box, browse to and select the Agfa Sherpa 43 printer.

  6. Save the process template.
    
                      OutputPDF-Sherpa43-720.tpl Prinergy Evo Connectivity to the Agfa Sherpa Printer
  1. Ensure Agfa Sherpa 43 is a network printer with a TCP/IP port and working properly (print a test page).
  2. In Prinergy Evo, Process Template Editor dialog box, open this process template.

  3. In the Processed File Preference section, select Send Processed Files to check box.

  4. In the Device Path box, browse to and select the Agfa Sherpa 43 printer.

  5. Save the process template.

 

Known limitations

None

Resources

Agfa

  • Fully supported
  • Device connectivity has been tested
  • A pre-configured process template is available

Device connectivity is not supported.

Reasons:

NT= Not tested
P = Performance problems
Cnct = Problems connecting
Qlty = Poor quality output
Pend = Not currently tested or supported but currently undergoing testing.