Known limits

Device model

Date tested

Tester

Device RIP

RIP OS

Process Template

Notes

Although the following document is for the HP5si, the procedures should be similar to those needed to connect to the Xerox devices. Defining Prinergy Evo Server Computer As a Print Spooler For an HP5si LaserJet Printer (196KB) PDF

Use as a color imposition proof mockup to check content and positioning

1. Ensure Fiery XJ+325 and Xerox 5750 is a network printer configured to use tabloid paper manually or via a paper tray and working properly (print a test page).

2. In Prinergy Evo, Process Template Editor dialog box, open this process template, and in the Processed File Preference section, select Send Processed Files to check box.

3. In the Device Path box, browse to and select the Xerox 5750 printer.

4. Save the process template.

Although the following document is for the HP5si, the procedures should be similar to those needed to connect to the Xerox devices. Defining Prinergy Evo Server Computer As a Print Spooler For an HP5si LaserJet Printer (196KB) PDF

Use as a color page proof to check content and color.

Repeat steps 1 to 4 above.

• Fully supported
• Device connectivity has been tested
• A pre-configured process template is available

Device connectivity is not supported.

Reasons:

NT= Not tested
P = Performance problems
Cnct = Problems connecting
Qlty = Poor quality output
Pend = Not currently tested or supported but currently undergoing testing.