Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

FCO #21421
Dolev 4Press - New Vacuum Tunnel Adaptor
November 5, 1995

Inactive, order 280B40096B instead (07 Aug 2005)

The vacuum tunnel adaptor needs to be replaced when side punch system is installed.

Prepared By: A. Posner FCO Kit No.: 510F21421
Comp. Level: N/A Machine S/N: lower than 9530XXXX
Catalog No. 280B40096B S/W Affected: N/A
Type of Change: Conditional    
Product Mgr: K. Paperny Approval Date: 09/29/95
Product Support: S. Amit Approval Date: 10/29/95
Service Mgr: S. Cohen Approval Date: 11/05/95
  1. Reason for Change
    The old vacuum tunnel adaptor should be replaced with a new one with
    a bigger tunnel for the slags. It is needed only when a side punch system is installed.
  2. Description of Change
    The vacuum tunnel adaptor is replaced with a new one.
  3. Change Procedure
    3.1 Open the left side door.
    3.2 Disassemble the vacuum tunnel adaptor.
    3.3 Install the supplied vacuum tunnel adaptor - III
    3.4 Continue with the side punch system installation
  4. Test Procedure
    Run a regular punch system test after installation.
  5. Parts List 280B40096B VACUUM TUNNEL ADAP. - III X 1
  6. Attached Documentation : None
  7. Material Disposition - The old vacuum tunnel adaptor can be disposed.
  8. Logisitics - Material for this FCO will be supplied a month after an order is placed

Go back

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.