Improving Cassette Positioning

Prepared By:	A. Posner	FCO Kit No.:	510F20877
Comp. Level:	N/A	Machine S/N:	N/A
Catalog No.	N/A	S/W Affected:	N/A
Type of Change:	Conditional
Product Mgr:	S. Amit	Approval Date:	05/02/95
Product Support:	M. Bar Natan	Approval Date:	05/02/95
Service Mgr:	S. Cohen	Approval Date:	05/02/95

Explanation of Conditional Change

The new handles will replace the belt and will improve the cassette positioning.

Parts Affected: Dolev 800
FCO Kit part no.: 510F20877

1.    REASON FOR CHANGE
2.    DESCRIPTION OF CHANGE
3.    CHANGE PROCEDURE
4.    TEST PROCEDURE
5.    PARTS LIST
6.    ATTACHED DOCUMENTATION
7.    MATERIAL DISPOSITION
8.    LOGISTICS

1. REASON FOR CHANGE

The positioning of the cassette with the belt is not accurate. The new handles will improve the cassette positioning in the loading compartment.

3. CHANGE PROCEDURE

Refer to the enclosed drawing (732E8F440)

3.1 Remove the belt and belt holder (#5) by releasing screws #21 (from both sides)
3.2 Remove the cover stopper (#2) by releasing screws #3 (from both sides).
3.3 Reinsert the screws (#21) to prevent light leak.
3.4 Install the handle holders with the handle on both sides, using the released screws.
3.5 Check and tighten all the cassette screws.
3.6 Repeat this for all three cassettes.

4. TEST PROCEDURE

4.1 Position the cassette in the loading compartment and perform film loading.
4.2 Make sure that no "light leakage" effects the film inside the cassette.

5. PARTS LIST

282A8F607	x3	Handle holder - right
282A8F608	x3	Handle holder - left
218B30906	x6	Handle