Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS


1b2_0.gif (1329 bytes)Field Change Order

FCO 22254 - April 15, 1996

Micro Version 5.16

The new version 5.16 has contains some new features and it will solve some of the known problems including the dual queue. It requires the PS/2 released version 4 with the Echo update # 2 or higher and/or Whisper version 7.1 RL with Update UPDT_PLT_45_A.

0. Header
1. Reason for Change
2. Description of Change
3. Change Procedure
4. Test Procedure
5. Parts List
6. Attached Documentation (attached to actual FCO)
7. Material Disposition  - not available
8. Logistics

0. Header

Prepared By: A. Posner FCO Kit No.: 510F22254
Comp. Level: N/A Machine S/N: ALL
Catalog No. N/A S/W Affected:
Type of Change: Mandatory
Product Mgr: G. Menchik Approval Date: 04/15/96
Product Support: G. Menchik Approval Date: 04/15/96
Service Mgr: S. Cohen Approval Date: 04/15/96

1. Reason for Change

1.1    New Features - see the attached document.
1.2    Solved problems - see the document.
1.3    Add new diagnostics. Diagnostics 1.07 will support the laser diode static optics and Diagnostics 1.3
         will support the old type.

2. Description of Change

The Dolev 800 is updated with the new version that is loaded on the Dolev 800 by booting from the new diskette. The PS/2 or / and the Whisper S/W must be updated as well.

3. Change Procedure

3.1    The istallation procedure is described in the attached document ( Micro Version 5.16 cat. #
        399Z8F702A)
3.2    Verify that the new version was loaded.
3.3     Configure and upgrade the PS/2 or the Whisper according to the Dolev 800 Configurations with version 5.16

Setting the Protocol ( On the PS/2 ):

Select Set-Up
Select I/O Devices
In #5 - Dolev 800 Parameters change the flag in option 6 to ver 5
Exit from the setting
Reboot the Dolev 800

In case of two PS/2 's repeat the same procedure for both PS/2's and only then reboot the Dolev 800

4. Test Procedure

4.1    Check the Dolev 800 functionality
4.2    Check and adjust the Dolev 800 tables.

5. Parts List

501V32365G System & Tools 5.16 x1
501V32366F Dolev 800 Diagnostics ver. 1.31 x1
501V32366H Dolev 800 Diagnostics ver. 1.07 x1
501V41537A PS/2 Echo 2 Update x1
501V50113 Whisper Update x1

6. Attached Documentation (attached to actual FCO)

399Z8F702A - Dolev 800 Micro Version 5.16
399Z8F703A - Dolev 800 Control Monitor

7. Material Disposition - not available

8. Logistics

Material for this FCO will be supplied one week after order placement.


    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.