Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Field
Change OrderThis FCO need to be implemented on Dolev 800 Loading cassettes that were shipped with triangle stopper in the cassette cover.
Header Info
1.
Reason for Change
2.
Description of Change
3.
Change Procedure
4.
Test Procedure
5. Part
List
6. Attached Documentation - None
7. Material Disposition - The removed parts can be disposed.
8. Logistics
| Prepared By: | A. Posner | FCO Kit No.: | 510F22412 |
| Comp. Level: | N/A | Machine S/N: | N/A |
| Catalog No. | 501S42073B | S/W Affected: | N/A |
| Type of Change: | Conditional | ||
| Product Mgr: | G. Menchik | Approval Date: | 06/04/96 |
| Product Support: | G. Menchik | Approval Date: | 06/04/96 |
| Service Mgr: | S. Cohen | Approval Date: | 06/09/96 |
Triangle stopper was added to about 100 the loading cassettes cover and this cover causes loading problems. A new cover without the triangle is installed.
Replace the cover with the triangle stopper with new one without the stopper.
Refer to the enclosed drawing (732E8F440)
3.1 Remove the old cover holder (#37) by releasing screws # 4
and # 21 (from both sides)
3.2 Remove the cover .
3.3 Install the supplied cover. Make sure to install back the spool holder on the cover.
3.4 Check and tighten all the cassette screws.
3.5 Check and adjust if needed the cover spacing in order to prevent the cover from
pressing the film.
3.6 Repeat this for all three cassettes.
4.1 Position the cassette in the loading compartment and
perform film loading.
4.2 Make sure that no "light leakage" effects the film inside the cassette.
4.3 Make sure that the film will go out from the cassette without any problems.
1 x 283B39086 cassette cover small
1 x 283E38436 Cover pad
2 x 387L02100 Latch
2 x 387L02105 Circlip for slide latch
1 x 285B39085 Cassette cover medium
1 x 285E38435 Cover pad
2 x 387L02100 Latch
2 x 387L02105 Circlip for slide latch
1 x 289B39084 Cassette cover large
1 x 289E38434 Cover pad
2 x 387L02100 Latch
2 x 387L02105 Circlip for slide latch
Material for this FCO will be supplied two months after an order is placed.
STA can order up to 35 kits
STE can order up to 35 kits
STAP can order up to 5 kits
STN can order up to 15 kits.