Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
A. Posner
December 9, 1993
This FSB deals with the latest FCO's and ECO's, which are relevant to the field.
A few tips will be listed in the last section of this FSB.
Recent FCO Topics
Recent ECO's
New Service
ItemN (Service Chain)
Service Tips & Notes
Dynamic optic - lens housing
FCO type - conditional
Effectiveness - on machines with s/n lower than 11322 (93340372).
Reason for change -
| a) | The new lens housing is assembled with a better glue, adhering the fiber optic to the lens and thereby preventing "bow" problems caused by poor adhesion, as in the old glue type. |
| b) | The problem can be identified when an inconsistent bow line appears in a range of up to several hundred microns. In this case, it can be caused by poor adhesion in the old glue type. External signs can usually be detected. Look carefully for a crack between the fiber connection and the fiber holder. Rotate carefully and verify that the fiber is secured to the holder. |
| NOTE: | Bow and linearity adjustment will be needed after this FCO implementation. |
Host cable - 30 meters
FCO type - conditional
Effectiveness - on machines with s/n lower than 9345xxxx
Reason for change - During plot, an error message of illegal stop spiral will halt exposure and the plot will be aborted. A better grounding of the cable shield is needed.
Data unit crate - data cable
FCO type - conditional
Effectiveness - on machines with s/n lower than 9348xxxx.
Reason for change - During plot, an error message of illegal stop spiral will halt exposure and the plot will be aborted. A better grounding of the cable shield is needed.
ECO 17037
ECO's 18471, 18482,
18483
ECO 18505
ECO 18566
ECO 18574, ECO 18577
ECO's 18588, 18589
Improved case and cover to the RF DRIVER PC ASSY. The functionality does not change and the board is the same as the old one. Catalogue number remains the same.
Effective as of 25/10/93. (S/N 9345XXXX and up)
Updating documents and drawings according to the new design. The new designs of the top cover assembly, middle cover assembly and lower cover assembly are current.
Effective as of 17/10/93. (S/N 9344XXXX and up)
Changes in the loading system.
Removal of the joining gear from one side of all the rollers of the loading system. The motion will be transferred with one joining gear. This change will reduce the cost of the loading system; will not effect its functionality, and will prevent some film jams.
Effective as of 25/10/93. (S/N 9345XXXX and up)
Adding the fiber optics cleaning kit 510L34300 to the personal jigs for Dolev 800.
Effective as of 4/11/93
Change the Dolev 800 I/F to the PS from the fast data kit to "VLSI LBX + CLASS" kit.
The new kit, catalogue no. 510K37511, consists of the following:
| Multimode fiber CBL 50/125 30 M | 138E00090 |
| SFLM board assy. | 503D27670 |
| Screen proc. LBX + CLASS SCREEN | 503D38691 |
| S/W, W/D PS/2 2-6.2/DLV800 V.4 | 510V37479 |
Effective as of 2/1/94.
These ECO's correct a design error in the unloading film guide. The matte side of the film was facing the unloaded film, whereas the shiny side is that which should be facing the unloaded film.
The ECO's affected the Dolev 800P load & unload assembly FCO kit for Dolev 800P (FCO 17766) and the FCO kit for Dolev 800 (FCO 17766A).
The old catalogue number is 298A29262. The new catalogue number is 298A29262A. - UNLOADING FILM GUIDE TYPE II.
Service chain - Dolev 800 507E39111
This chain can use a service chain for the cutter (both chains), as well as for the spreader.