Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Dolev 800 Field Service Diagnostics -
Utilities - Film
Load
Unload
Focus
Plot Sim
12C File
Load Film by selecting length and Cassette number.
Unload Film.
Max intensity cas #2 loaded 500[mm] carriage at 100[mm]
Operate the plotter (Plot Simulation) in loop. In this utility almost all machine functions are been activated with user desired parameters.
Operate I2C commands from file.
The File Format is: [Example for vacuum OFF-ON-OFF]
| DEVICE | R/W | Add(H) | Data(H) | [Data(H)] | [Data(H)] |
| expander | w | address | data | ||
| expander | r | address | |||
| pcf8591 | w | address | data | ||
| pcf8591 | r | address | channel | ||
| tda8444 | w | motor | direction | volt limit | cur. limit |
| tda8444 | c | motor | value | volt/cur | |
| tda8444 | d | motor | drv | state | |
| tda8444 | m | motor | direction | on/off | not used |
| omc | r | entry | |||
| delay | x | value(dec) | |||
| pause |