Dolev 800 Field Service Diagnostics - Utilities

Home | Contact Us | Submit Troubleshooting Info | Search | Help

Dolev 800 Field Service Diagnostics -
Utilities - OMC

Tools
Write/Read
Multimeter

Tools

Load XILINX
Load WCS
Reset 196
196 Ver Wcs
Send Opcode
Disable 196
Verify WCS

Load XILINX

Loads OMC.XIL file from the current directory to Xilinx.

Load WCS

Loads OMC.WCS file from the current directory to WCS RAM.

Reset 196

Creates RESET pulse on 196 for enable Micro running. StartUp test is been rerunning.

Micro (196) Compares WCS data to OMC.WCS file data.
Verify process is the same like from Pc, described before. This utility takes about 5 minutes, because of each reading from the WCS is been done by the opcode. Fail means that there was illegal writing to the WCS Code area, so after the fail WCS is being reloaded automatically and the next test execution might complete with Pass.

Send Opcode

User can send the specific opcode with proper parameters and receive returned values.

Disable 196

Disable Micro running. Enables PC control.

Verify WCS

OMC Micro (196) Loads user requested WCS file (not only OMC.WCS) and Compares WCS data to the file data during running of the micro. Verify process is the same like from Pc, described before. This utility takes about 5 minutes, because of each reading from the WCS is been done by the opcode. Fail means that there was illegal writing to the WCS Code area.
*) This Utility can run in loop.