Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
S. Avisror
May 13, 1997
The new VLSI Class II board cat # 503D40259 required different dip switches settings.
Check and configure the board's dip switches as follows:
If installed
inside the Whisper
If installed
inside the imagesetter
Dip Switches with
no change
| U311 | On: 4,6,7 Off : 1,2,3,5,8 |
| U314 | On: none Off: all |
| U311 | On: 4,5,6,8 Off: 1,2,3,7 |
| U314 | On: 2,3,4,5,6,7,8, Off: 1 |
| U1515 (4 DIP-SWITCHs device) : | On: 2 Off: 1,3,4 |
| U1308A (4 DIP-SWITCHs device): | On: 1 Off: 2,3,4 |