Product

Background

This procedure describes how to replace a large cassette motor (cassette motor assy, P/N 507E3E711).

Note that the small, medium and large cassettes all use the same type of motor and the replacement process is identical.

Procedure

1. Turn off the machine and disconnect the main power cable.
2. Slide out the loading system.
3. Remove the multi beam front cover to enable access to the loading system cassette motors.
4. Remove the external close cable chain by loosening the two chain tension screws on the axel holder assy.
5. Remove the cap from the motor to access its wiring.
6. Mark the location of each wire, and then disconnect the wires.
7. Remove the motor by removing the four Allen screws that connect the motor to the bracket.
8. Install a new motor, and secure it in place with the four Allen screws.
9. Reconnect each wire to the motor.
10. Reinstall the cap on the motor.
11. Install the external close cable chain.
12. Install the multi beam front cover.
13. Reinsert the loading system.
14. Connect the main power cable and turn on the machine.

Images

Test

Load film and verify smooth operation.

See also

Dolev 800 V3/V4 Error Messages

Technical contact(s)

Content owner: Oded Zaccai
See the Escalation page for escalation contacts.

Date submitted

04 Jun 2002