Product

Background

This procedure describes how to replace a cutter chain spring (EXT. OD=.375"L=1"W=0.055"  STST, P/N 363B10251).

Procedure

1. Turn off the machine and disconnect the main power cable.
2. Slide out the loading system.
3. Loosen the cutter chain by loosening one of the 6-32 screws on the cutter assy.
4. Disconnect the spring from the cutter assembly and from the cutter chain.
5. Connect a new spring to the cutter chain and to the cutter assembly.
6. Stretch the cutter chain by pushing the tension brackets together, and tightening the 6-32 screw to secure them.
7. Return the loading system to the machine.
8. Connect the main power cable and turn on the machine.

Images

Test

Load film and verify smooth cut.

See also

Dolev 800 V3/V4 Error Messages

Technical contact(s)

Content owner: Oded Zaccai
See the Escalation page for escalation contacts.

Date submitted

18 Jun 2002