Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Previous Page | ToC | Next Page
Introduction
Specifications
| Type | IR sensitive Aluminum plates
(830 nm) include ablation plate. |
|
| Size | Min. | 381 x 318mm (15”x12.5”) |
| Max. | 750 x 622mm (29.5”x24.5”) | |
| Flexibility | Any plate size within this range, | |
| Thickness | 0.15-0.3 mm (6-12 mil. nominal) |
| Relative to plate | Over the entire plate, except for press gripper area. Smallest supported press gripper area is 10mm at leading edge and 6mm at trailing edge of the plate. |
| Edge exposure for positive plate | Yes |
| Marks exposure | Yes |
| Resolution range | 60 -140 dot/mm continuously variable. |
| Line screen range | 300 line screen (media dependent) |
| Different angles | Total flexibility |
| Special screening methods | Turbo screen |
| +/-1% over entire plate. |
 |
Variation in plate thickness will impair accuracy (this is not a Lotem 400 issue). |
| Absolute image accuracy | +/- 25 micron |
| Image to plate reference | +/- 25 micron (for multi cassette only). |
| Image repeatability between plates | +/- 25 micron |
| Total throughput (B2 plate at Res. 100): 16 plates per hour. |
| Type of station | Brisque Tiger II |
| No. of input sockets (stations) | 1 |
| Power line | Voltage range Adjustment means Frequency range Power consumption |
200 - 240 VAC (+/- 10%) Voltage selector plug 50-60 Hz 5 KVA |
| Carriage control | Light control mechanism | Automatic adjustment for different media & different resolutions. |
| Diagnostics | Boards System Remote |
Supported Supported Supported |
|
Panel opening is not allowed during load/unload. |
| Load procedure | Basic semi-automatic |
|
| Option – full auto, multi cassette loading | Fully automatic operation.
|
|
| Unload procedure | Auto unloading of plates. | |
| In-line conveyor | Optional, supplied by Scitex |
| Semi-auto config. | No punching. Image positioning is by plate edge detection. | |
| Basic definition | This option will meet customer needs only in auto-loading version. | Punches will be field added option, and payable based on configuration. Platesetter will be manufactured and supplied with no punches. Standard punch kits will be defined based on press configurations. Punches will be selectable, so that the image area of any selected plate, within the spec range will not be punched by undesired holes. Maximum 5 punches. |
| Location | Leading edge of plate (relative to press loading direction). |
| Size | Height, width, depth - 52.7 inch (1.34m) x 69.3 inch (1.76) x 36.2 inch (0.92m). |
| Weight | 750 kg (1650lb.) |
| Shipping | Suitable for conventional air transport. |
| Pressure | 6 ATM (100 psi) |
| Flow | At least 3 CFM |
| CE approved. |
| Noise | 70 dB |
| Lighting | Some plates, such as Kodak IDTP, are sensitive to UV light. When such plates are used or when the machine is directly connected to plate stacker, you need an appropriate safe light. |
| Temp. | 20-25°C (68-76°F) |
| Humidity | 55% +/- 5% |
| General | To be performed only by a certified Lotem 400 service engineer. |