Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Problems downloading? More...
If your file does not open correctly after downloading: breaks in data transmission during file transfers are common when network traffic is high. A break and subsequent restart may cause an error at the restart point, which results in a corrupt transfer. The end result is a file that does not open or run correctly. For example, *.exe files may not run, *.pdfs may not open, and *.zip files may be reported as invalid archives. The simplest solution is to retry downloading the file. If the problem persists, try to download the file when network traffic is lighter.
| Name | Description | Download |
| BIOS | BIOS files for Magnus 400 and Magnus 400 Quantum | BIOS (Zip file) |
| Name | Description | Download |
| Creo Feature Licensing Server |
The Creo Feature Licensing (CFL) server is an integrated feature license management system that provides feature control management for multiple applications. Important: Before you install the CFL software, read the PDF file (731-00813A) included in the Zip file. |
LicensingServer (Zip file) |
| Service Shell 2.6 SP2 | Important: Before you install Service Shell 2.6 SP2, read the Release Notes (PDF file) included in the Zip file. | ServiceShell (Zip file) |
| Name | Description | Download |
| hosts file | Connects between the IP address and the MCE name | hosts file |
| Name | Description | Download |
| Firmware for Magnus 400 (14 Dec 2005) | ||
| Name | Description | Download |
| Infineon Memtool 3, version 3.4 |
Memory programming tool for:
|
Infineon – Memtool 3 |
| Name | Description | Download |
| Update 1 for Magnus 400 Controller 1.02.392 |
When the distance between the tweezers on the paper clamps on vacuum
bar assembly is too short to support wide plate sizes, the tweezers fail
to pick up the plates. For more information, see the Update 1 for version 1.02.392 release notes. |
Update 1 for Magnus 400 Controller 1.02.392 |
| Name | Description | Download |
| Lif B to C | See Replacing LIF Ver B with LIF Ver C. | LIF B to C (Zip file) |
| Xpose Update 6.1 | Improves throughput with TIFF files from Prinergy. See Update 6.1 Release Notes. | Update_6.1.zip (CD coming soon) |
| Xpose Version 1.1.47 (512-00118A) | ||
| Name | Description | Download |
| Ghost Backup and Restore Utility | This tool backs up and restores a ghost image of the previous C drive or the entire disk. | Ghost Backup and Restore Utility |