Product

Magnus^® 800

Background

When a plate is punched, the slugs are deposited in the punch slug bin.
This procedure describes how to clean the punch slug bin.

Procedure

Cleaning the punch slug bin

1. In Magnus Controller, click Raise Platform to raise the platesetter loading platform:
   
   
   
   
2. Remove the upper front panel:
   
   
   
   The punch slug bin is located at the front of the platesetter, directly above the drum:
   
   
   
   
3. Two black buttons are located on the front of the bin. Simultaneously, press the two buttons and slightly lower the front of the punch slug bin:
   
   
   
   
   
   
4. Use a vacuum cleaner to remove all the slugs from the bin.
5. Raise the front of the punch slug bin:
   
   
   
   
6. Reinstall the upper front panel.
7. Manually lower the loading platform.

Technical contact(s)

Content owner: Itai Peperovich
See the Escalation page for escalation contacts.

Date submitted

17 Feb 2005