Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Field Change Order C933: Trendsetter 3244_ or 3244F to 3244V Upgrade

Note: An upgrade from Proofsetter to Trendsetter Spectrum are also included in ECO C933. For these procedures, see the Trendsetter Spectrum FCO C933 procedure.
 
Applies to:    Trendsetter 3244 Priority = N/A
Trendsetter Autoloader Reason = Design
Release date = 7 July 1999
Machines affected Machine S230 and up and 983631080 and up.
Component N/A
Description 3244_ or 3244F to 3244V field upgrade

The machine must have the following 100 label numbers:

Base Trendsetter 100 label #

  • #2 Hard Engine mounts and Load Ramp Arms (Eco C000)
  • #3 Tee Board (ECO C039)
  • #11 Version D Frame (ECO C335) -with hole for water cooling in rear of frame
  • #12 Version C carriage (ECO C226) –requires at least #6 (version B carriage) and upgrade with 05-0051
  • #13 Power Box wiring upgrade (ECO C449)
  • #15 Back Filler Panel (ECO C572)
  • #19 EMI upgrade (ECO C910)

Autoloader 100 label #

  • #4 Load table Cylinder (ECO C380)
  • #16 Back filler panel and Desiccant bracket (ECO C775)

Note: Creo built machines already have #2, #3, #11, #12 and #13 on the base Trendsetter. Heidelberg built machines already have #3, #6, #11 and part of #2 on the base Trendsetter (the hard mounts are installed on all machines but some machines require the Load Ramp Arms).
Parts needed Kit 02-4314A
Procedure For installation of 40W Head, see Upgrading to a 1.7x Water-cooled Thermal Head

For carriage upgrade, see Thermal Exposure Head Mounting Conversion Procedure

For EMI upgrade, see FCO_953/fco_c953.htm

For load ramp arms upgrade, see 50-1298DA ASSY,MECH,PLATE ALIGNMENT,TS3244. Only the top and bottom arms need replacement.
Action Required
Date submitted 7 July 1999
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.