Trendsetter 400/800 TSM(MCE)

Home | Contact Us | Submit Troubleshooting Info | Search | Help

TSM (MCE) Boards

Checking voltage supply test points helps to isolate problems resulting from connection and power supply failures. Reseat all connectors on the PCB assembly before checking voltage supply test points.

Warning:
Many of the electronic components in the Trendsetter 400/800 are extremely sensitive to electrostatic discharges. Before troubleshooting any electronic components, ensure you are properly grounded with an antistatic wrist strap connected to a ground point within the machine.

Warning:
Some boards and cables in the Trendsetter 400/800 conduct high voltage signals. Verify whether a high voltage is present before disconnecting a cable or servicing a board.

Note: Please refer to SAP for the latest information on the items listed below.

Part Number	Description
10-4112J	POWER DISTRIBUTION BOARD If replacing 10-4112G, order 10-4112J plus cable 220-00260A. If replacing 10-4112H, order 10-4112J. Note: 10-4112J only works with main PDB firmware version 1.26 and core PDB firmware version 1.26 10-4112H works with both old firmware and main PDB firmware version 1.26 and core PDB firmware version 1.26
10-4227E	GENINE BOARD Note: 10-4227E only works with main Genine firmware version 1.26 and core Genine firmware version 1.26 10-4227D works with both old firmware and main GENINE firmware version 1.26 and core GENINE firmware version 1.26
10-4581A	PSEB - Pressure Sensor board Assembly Drawing \| Schematic
10-4766	MCE BOARD Order 510P1P974A to replace any version of 10-4766. Kit includes MCE board and adapter cable.
10-4789B	PASS THRU BOARD, UDRC
10-4801C	LIONEL BOARD
10-4817B	IBUTTON-IF BOARD, UDRC-LC
10-4821A	DISPLAY BOARD, UDRC
10-4883A	DRUM RESISTIVE BRAKE BOARD
10-4935C	CARRIAGE DRIVE BOARD - replaced by 503C01525B
10-5072A	PRELOADER INTERFACE BOARD, TSAL
503-00011A	USER INTERFACE BOARD
503-00050B	TEC SENSOR BOARD
503C01525B	CARRIAGE DRIVE BOARD (see FCO CA00752 to replace 10-4935)