Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

MPE Cables

Note: The documentation may not be current. Please refer to SAP for the latest information.

10-0935A TEM-DIS (Not used on TS8)
10-0937A Ground Wire, CONVEYOR/ENG
10-0947B AVM-LU
10-0953A Ground, Z-DRIVE Motor
10-1003A Ground, BRAID, 300mm
10-1051A Ground, BRAID, 7620mm
10-1220A Board, ASSY,CDDI NETWORK,PCI,UTP CABLE
10-1437B DC harness
10-1448A Pneumatic harness,engine
10-3187B Operator interface cable BUT-OIF(J2) (TS3 only). See assembly drawing
10-3188A OIF-TIF
10-3189C SH-LU
10-3209A FLEX TRACK
10-3210A AC harness
10-3256B TS-LU
10-3258A EH-BP(J28) (TS3 and TS3/8 only)
10-3259A EH-BP(J22) (TS3 and TS3/8 only)
10-3260A EH-PDB (TS3 and TS3/8 only)
10-3261A TIF-BP
10-3262A TE-BP
10-3268A DI-BP
10-3269A BLKHD-PDB,POWER BOX
10-3270A CM-CD
10-3271A EXT-PDB
10-3272A LAS-PWR (TS3 and TS3/8 only)
10-3276A DOOR SENSOR/ABORT SWITCH1-BP
10-3277A WS-BP
10-3278A SPI-TIF
10-3279A MDM-MD
10-3282A HA-BP (TS3 only)
10-3283A LU-BP
10-3284B LU-PDB,SHIELDED
10-3286B TIF-PDB,SHIELDED
10-3287A FB1-PDB
10-3288A PB-GND
10-3318A GND-PDB
10-3319B WT-BLKHD,FANBOX
10-3324A CD-A-BP
10-3325A CD-D-BP (TS3 and TS3/8 only) For TS 8, see 10-4757A.
10-3326C DOOR SENSOR/ABORT SWITCH2-PB
10-3327A MD-PDB
10-3328A MD-BP
10-3330A PS5-PS RELAY
10-3331A PS RELAY-BP
10-3332B PS-BLKHD,FANBOX
10-3369A CARD CAGE FAN AC INPUT
10-3610B Load ramp, plate sensor - Obsolete - replaced by 10-3687B
See FCO E897
10-3611A ESEN-TEE(J7),TS3 (for TS3 and TS3/8)
10-3612A PLATE FLY OFF SENSOR
10-3618A WT-RELAYS,FANBOX
10-3619A FL1-WT I/P,FANBOX
10-3620A T2-WT,FANBOX
10-3624B HARNESS,WT-FANBOX,TS
10-3625A TB5-J2,FANBOX,TS
10-3626A GND WIRE,L/U RAMP
10-3628A FB-FRAME,FANBOX
10-3629A PDB-P22,P23-BLKHD,POWER BOX
10-3643A SYSBLO,ADAPTER
10-3644A P8-J23,PDB ADAPTER
10-3645A GND BRAID,END PLATE
10-3681B Power relay adapter cable EAVM-TEE(J20)-REL (TS3 only)
10-3687B Load ramp sensor-TEE(J3)

6 pin connector to fit into the TEE Board on J3 connecting the LRS (Load Ramp Sensor - Optical) to the TEE Board

See FCO E897.
When ordering this cable check for upgrade for film static. If it is installed, then order both 10-3610B and 10-3687B; if not, order 10-3687B only.
10-3770A TEE(J8+J19) - CHL(FD) (TS3/8 only)
10-3875A WS-BP, TS4/TS8
10-3876A DI-BP, TS4/TS8
10-3881A TEE-SPI(BP), TS4/TS8
10-3883C TEE-TEMP
10-3886B DIN, PS1
10-3887B DIN, PS2 (TS8 only)
10-3888B DIN, PS3 (TS8 only)
10-3892B DIN, Thermal Relay Control Harness
10-3893B DIN, TEE (Relay Control) Harness
10-3897B PS5-TH1.7, 48V, TS4/TS8
10-3902A ESEN-TEE(J7),TS4 (for TS4 and TS8)
10-3903B EH-BP (J28) (TS4/TS8 only)
10-3904A HA-BP, TS4/TS8
10-3905B EH-BP (J22),TS4/TS8
10-3909A PS3,Switching,40W
10-3926B TEE(J20)-VALVE, TS4/TS8, see assembly drawing
10-3927A TEE-J8 Sensors, PWR-FAN
10-3929B RDC J4 to the Abort switch
10-3930A TE Actuator Harness (discontinued on ECO E120)
10-3930B TE Actuator Harness, see assembly drawing
10-3937C DC Harness, TH1.0, TS4/TS8 (TS4/TS8 only)
10-3975A DIN, ALARM
10-3976B DIN, LS-BP
10-3986B DIN, SERVO AMP
10-3989B Delay Relay Control
10-3996C ADAPTER,TEE(J20)VALVE
10-4017A Ground, Carriage Motor
10-4034A Disconnect to TEE
10-4044A ABORT SWITCH
10-4057B SCSI3 F68P-22, SHIELDED M68P
10-4066A TEE(J20)-VALVE
10-4105A Coax hot link cable, (head) EH-Bulkhead, see assembly drawing (TS3 only)
10-4106A Coax hot link cable, Bulkhead-FDPE, see assembly drawing (TS3 only)
10-4108B Coax hot link cable, Bulkhead-FDPE, see assembly drawing (TS8 only)
10-4109B Coax hot link cable, (head) EH-Bulkhead, see assembly drawing. (TS8 only)
10-4334B DIN, fan box power
10-4335A Fan box power, see assembly drawing
10-4385A Power for Desiccant System
10-4567A External chiller/debris removal cable harness

See assembly drawing.
10-4602A Load ramp sensor
10-4757A CTRL-BP (TS8 only) Carriage driver board (10-3761) to backplane
10-4763A carriage power, PS3 (TS8 only)
10-4797B Drum brake board to servo amp 15-3466, see assembly drawing. Also refer to page 3 of schematic.
10-4799A Drum brake board to J2 of RDC board. Used with servo amp 15-3466. Also refer to page 3 of schematic.
10-4803A Servo braking control, see assembly drawing. Drum brake board to J2 of RDC board. Used with servo amp 15-3330, refer to page 3 of schematic.
10-4804B Drum brake board to servo amp 15-3330, see assembly drawing. Also refer to page 3 of schematic.
10-4815B DC Harness, TH1.7, TS4/TS8
10-4947A LEC-end adapter, see assembly drawing. ECO E120
10-4948A LEC adapter. ECO E120
10-4957A Dehumidifier Unit, Power Adapter,
10-4965A Dehumidifier Unit, Control/Power Harness
10-4997A Dehumidifier Unit, TEE/ESE Adapter
10-5067A Preload Adapter Cable, assembly drawing
16-3460 DB9, M-F, 25', SCRWLK
16-3503 SCSI-3, M-M, 25', EXTERNAL, PRE-MOLDED
16-3532A Obsolete hot link cable - see 10-4105A and 10-4106A for TS3 or 10-4108B and 10-4109B for TS8
16-3767A CAB, SCSI-III, 90 DEG, M-F, 7.5', INTERNAL
16-3907 ADAPTER,SCSI,VHD-HD68,M-F
16-3994A NA power cord, TS3
16-3996A EU power cord, TS3 See assembly drawing.
16-4025A UK power cord, TS3 - installed only at UK sites that have high current leakage problem
50-1616A Picker pulley cable
220-00163B CA POWER, PS4, TS Carriage power cable (MPE) assembly drawing 220-00163B
220-00514B TEC SENS OUTPUTS,TS4,TS8

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.