Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Overview

Product description | Product status | Specifications | Upgrades

Product description

The Trendsetter 400/800 is a semi-automatic, 4 or 8 page device. The device has gone through three major revisions in its lifetime.

TSM (GMCE, III)
  • Serial numbers from TG001 and up
TSM (MCE, II)
  • Serial numbers from TM001 and up
TS8
  • Serial numbers from TE001 and up
  • Heidelberg S/Ns beginning at xx3860001
TS3/8
  • TS3 frame with a TS8 engine.
  • Serial number begins with S starting at S332 and up
  • Heidelberg S/Ns beginning at 993631324
TS3
  • Serial number begins with S, S001 to S331
  • Heidelberg S/Ns  983631000 to 993631323
TS4
  • Serial number begins from TF001 and up
  • Heidelberg S/Ns beginning at 98371xxx and xx385xxx
  • See also Trendsetter 3230(TS4) site

For a draft summary of hardware differences between the TS8 and TSM versions, see Hardware Differences MPE to MCE.
For a draft summary of firmware differences between the TS8 and TSM versions, see Firmware Differences MPE to MCE.

For a summary of differences between the TS3 and TS8 versions, see Differences between TS3 and TS8.

Product status

Trendsetter III (GMCE) in Full Production

Trendsetter II (TSM) no longer in Production

All Trendsetter 400/800 TMCE/GMCE devices include a UDRC-B.

All Quantum-ready Trendsetter 400/800 MCE devices include a P33 head.

TS8 no longer in Production

TS4 is at End of Life

Specifications


For serial number TG0536 and higher: For serial number TG0535 and lower:

Kodak Remanufactured Solutions (KRS) Specifications

For Trendsetter 400/800 option specifications, see:

Upgrades

For information on upgrade options, see Trendsetter Upgrade Paths and Trendsetter Upgrades.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.