Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Table doesn't move

Applies to
  • VLF Trendsetter AL
Machines affected All machines.
Error Number None
Component Table
Problem The table does not move up or down.
Causes and Solutions Cause:  The conveyor interface plate is not attached properly.
Solution:  The conveyor interface plate must be completely snapped down so that it makes contact with the two sensors underneath. One sensor is connected to the safety loop of the base machine; the other is part of the VLF Trendsetter AL safety loop. For more information see the safety loop wiring diagram:  Safety circuit, 73-3657
Technical contact Dal Wagner
Date submitted 18 May 2000
Date modified

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.