Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
This page contains links to VLF Autoloader specific cables.
For cables in the base Trendsetter VLF, see the VLF
Trendsetter cables page.
L-Conveyor
Multiple Cassette Unit (MCU)
Picker
Power Box
Rotating Conveyor
Single Cassette Unit (SCU)
Slip Sheet Removal (SSR)
Straight Conveyor
Trendsetter
| Item | Stored Service Parts | Notes |
|---|---|---|
| Photo interrupter cable assembly | 10-4273 | Will be replaced by 10-4733. |
| Genine 1 to stepper power | 10-4358B | |
| Genine 4 to bulkhead | 10-4375C | |
| Genine 4 to stepper | 10-4455 | GNE0-stepper_AD; |
| Conveyor cable assembly | 10-4461 | |
| Front eject | 10-4711 | |
| Rear eject | 10-4712 | |
| X-axis sensor | 10-4713B | |
| Y-axis box | 10-4714 | |
| Dig. IN3 | 10-4715 | Inactive, Mar 2003 (ECO E260) |
| Y-Stepper motor | 10-4716B | |
| X-Stepper motor | 10-4717 | |
| Up/down cylinder | 10-4731 | |
| Up/down sensor | 10-4732 | |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| Solenoid Drive, Actuator, Manifold | 10-4747B | |
| Genine 4 Blkhd_ex | 10-4764 | Replaced by 10-4375C (ECO E260) |
| GNE-stepper | 10-4765 | |
| Table-Chassis ground | 10-4932 | |
| Processor I/F-Genine 4 inputs | 10-4970A | |
| Processor I/F-Genine 4 outputs | 10-4971A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Photo interrupter cable assembly | 10-4273 | Replaced by 10-4733. |
| Genine 1 to stepper power | 10-4358B | |
| PDE to blower | 10-4364 | |
| Blower ground cable assembly | 10-4688 | |
| PDE EX | 10-4700 | |
| X-Stepper to bulkhead | 10-4701C | MCU carriage drive board to Trendsetter. |
| X-Stepper (pre-umbilical) | 220-00237A | Applies only to the first 20 TS VLF ALs, which do not have a detachable umbilical cord between the base TS and the MCU. |
| Chariot LTS | 10-4702 | |
| Relay I/O | 10-4703 | |
| Dig. IN3 | 10-4705C | |
| Sol. DRV0 | 10-4706 | |
| Dig. IN4 | 10-4707 | |
| Chariot cassette | 10-4708 | |
| Manifold | 10-4710 | |
| Door safety operation | 10-4724 | |
| Service panel safety | 10-4725 | |
| Chariot door safety loop | 10-4726 | |
| Manifold | 10-4729C | |
| Cassette sensor | 10-4730 | |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| Chariot track | 10-4734 | |
| Jog button panel | 10-4736 | |
| Inverter power | 10-4741 | |
| Coil contactor | 10-4745 | |
| Relay contacts | 10-4752 | |
| Plate ssfety ext | 10-4770 | |
| Roof safety | 10-4822 | |
| Bulkhead ext for MCU CANBUS | 10-4874 | |
| SSR to MCU bulkhead | 10-4876B | MCU bulkhead to SSR |
| Relay to SSR power | 10-4889 | MCU power box |
| estop to bulkhead estop circuit | 10-4892 | |
| MCU bulkhead assembly | 10-5038A | |
| MCU bag sensor module, non-GT | 220-00303A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Photo interrupter cable assembly | 10-4273 | Replaced by 10-4733. |
| GNE2-SENS | 10-4367C | Also used on DM picker |
| GNE2-MANIFOLD | 10-4368A | |
| GNE2 -LTS | 10-4369A | Also used on DM picker |
| GNE2-TERM | 10-4370A | Also used on DM picker |
| GNE2-SS SENSOR | 10-4389B | For slip sheet detection |
| GNE2-VAC SENS | 10-4689A | Used on:
picker and arm (1) SS picker (1) DM picker (1) |
| Picker manifold | 10-4728 | |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| Ground wire | 10-4875A | |
| GNE2-SSRELAY | 10-4904A | Also used on DM picker |
| GNE2-PRES SENS | 10-5037A | Also used on DM picker |
| Lift cable assembly,slipsheet picker | 57-7652B | Will be obsolete once all machines have been retrofitted with new pickers / wedgemasters. |
| Sensor-GENINE2 | 220-00339B | for Delicate Media (DM) picker |
| Relay, terminal block, DM picker | 220-00340B | |
| Picker roller motor | 220-00341B | |
| Manifold-J5, DM picker | 220-00342B | |
| Home/away sensor,DM picker | 220-00343B | |
| Manifold-J2-J4,DM picker | 220-00344B | |
| Sensor tester, DM picker | 220-00533A | |
| Home sensor extension,DM picker | 220-00534A | |
| Away sensor extension, DM picker | 220-00535A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Genine 0 to bulkhead | 10-4348 | GNE0-BLKHD_EXR |
| Genine 0 to table safety | 10-4449 | GNE0-TABLE SAFETY |
| Genein 0 to ESE power | 10-4453 | GNE0-ESE_POWER |
| Bulkhead to power box autoloader safety circuit | 10-4900 | BLKHD-PWRBOX AL SFTY CCT |
| PDB J14, 10P-16P adapter cable | 220-00316B | Used with the H version of Power Distribution Board (10-4112) |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Genine 1 to stepper power | 10-4358B | |
| X-axis sensor | 10-4713B | |
| Y-Stepper motor | 10-4716B | |
| Solenoid Drive Actuator, Manifold | 10-4747B | |
| Processor I/F-Genine 4 inputs | 10-4970A | |
| Processor I/F-Genine 4 outputs | 10-4971A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Photo interrupter | 10-4273 | garage shutter
Replaced by 10-4733 |
| Genine 1 to manifold2 | 10-4349 | GNE1-MANF2; garage |
| Genine 1 to sensor | 10-4350 | GNE1-SENS; SCU bulkhead to Trendsetter |
| Genine 1 to dock sensor | 10-4351D | GNE1-DOCKSEN; SCU bulkhead to SSR |
| Genine 1 to bulkhead home/away sensor | 10-4353 | GNE1-BKHD_H/A SENS; SCU bulkhead to Trendsetter |
| Genine 1 to manifold | 10-4354C | GEN1-MANF; garage |
| Genine 1 to bulkhead | 10-4357 | GNE1-BKHD EX; SCU bulkhead to Trendsetter |
| Genine 1 to stepper power | 10-4358B | |
| PDB to blower | 10-4364 | PDB-BLOWER; garage |
| PDB to bulkhead | 10-4366 | PDE-BKHD EX; SCU bulkhead to Trendsetter |
| X-Stepper to bulkhead | 10-4465 | Inactive Apr 2003. Replaced by 10-4701C. |
| Genine 1 to dock sensor2 | 10-4618 | GNE1-DOCKSEN2; garage |
| Blower ground cable | 10-4688 | garage |
| X-Stepper to bulkhead | 10-4701C | SCU carriage drive board to bulkhead connector. Replaces 10-4465. |
| X-Stepper (pre-umbilical) | 220-00237A | Applies only to the first 20 TS VLF ALs, which do not have a detachable umbilical cord between the base TS and the SCU. |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| Relay contacts | 10-4791 | garage |
| SSR to MCU bulkhead | 10-4876 | SCU bulkhead to SSR |
| Relay to SSR power | 10-4889 | SCU power box |
| Genine J2 to SSR bulkhead | 10-4890B | GNE1 J2-SSR BLKHD |
| J24 to SCU bulkhead estop circuit | 10-4925 | J24-BLKHD ESTOP CCT; SCU bulkhead |
| SCU bulkhead assembly | 10-5040A | |
| Null modem, DB9, M-F, 12' | 16-4343 | garage |
| Cable assembly 1.6mm DIA*3276mm | 57-7443 | long covered cassette |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Photo interrupter | 10-4273 | wedgemaster home sensor
Replaced by 10-4733. |
| Motor power | 10-4648 | MTR PWR |
| SS bin full sensor | 10-4652 | |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| SSR bulkhead | 10-4877E | |
| Safety loop to relay | 10-4888 | |
| SSR to SCU/MCU | 10-4917B | SSR-SCU/MCU |
| MCU/SCU Bulkhead to SSR | 10-5039B | MCU/SCU BLKHD-SSR |
| SSR bulkhead retrofit | 10-5055A | |
| Safety loop to relay, extended | 10-4952 | SFTY LOOP-RELAY, EXTENDED |
| SSR bag sensor | 10-5226A | PULL UP RES,SSR BAG SENS |
| MCU bag sensor module, non-GT | 220-00303A | |
| Roller closed SSR | 10-5226A | ROLLER CLOSED,SSR |
| SSR bulkhead B | 10-5248A | BULKHEAD B,SSR |
| Slipsheet Sensor I/F Adapter | 220-00335A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Genine 4 to plate sensor | 10-4373 | GNE4-PLTSENS |
| Genine 4 to bulkhead | 10-4375C | |
| Genine 4 to conveyor | 10-4376 | |
| Genine 4 to terminator | 10-4377 | GNE4-TERM |
| Genine 4 to home/away bypass | 10-4388 | GNE4-HA_BYPASS |
| Conveyor cable assembly | 10-4461 | |
| Plate sensor | 10-4604 | |
| X-axis sensor | 10-4713B | |
| Solenoid Drive Actuator, Manifold | 10-4747B | |
| Bulkhead extension for conveyor CANBUS | 10-4873 | |
| Conveyor dropleaf | 10-4914 | |
| Genine 4 bulkhead to RS conveyor | 10-4926 | GNE4 BLKHD-EX,RS-CONV |
| RS conveyor | 10-4930 | |
| Processor I/F-Genine 4 inputs | 10-4970A | |
| Processor I/F-Genine 4 outputs | 10-4971A | |
| S-conveyor 24V to relay | 10-5049A | |
| 24V-power supply, S-conveyor stepper | 10-5050A | |
| Stepper driver with speed control | 10-5052A | |
| Genine4-bulkhead extension, manual mode | 10-5091A |
| Item | Stored Service Parts | Notes |
|---|---|---|
| Engine module disconnect | 10-1322 | |
| Table down switch | 10-1443 | |
| ELEC,PS,24V,600W,TEC | 10-3102 | |
| EMI-PDB | 10-3513 | |
| Start button | 10-3613 | |
| Electric power control, debris filtration system | 10-3973 | |
| Photo interrupter cable assembly | 10-4273 | Replaced by 10-4733 |
| Genine 0 to home/away sensors | 10-4345 | GNE0-HOME/AWAY SENSORS |
| Bulkhead expansion bus L_EX | 10-4346 | |
| Genine 0 to Y-Stepper | 10-4347 | |
| Genine 1 to PDB expansion bus | 10-4356 | GNE1-PDB EXPANSION BUS |
| AC power to 48V supply | 10-4360 | PDB-48PSU AC |
| AC power to 24V supply | 10-4361 | PDB-24PSU AC |
| 48VDC to PDB | 10-4362 | |
| PDB to blower | 10-4364 | |
| GNE2-MANIFOLD | 10-4368A | Also used on DM picker |
| GNE2-TERM | 10-4370A | GNE2-TERM,EXP BUS TERMINATOR |
| Track lights to bulkhead | 10-4380 | TRK LTS-BKHD |
| Bulkhead to stepper | 10-4381 | BKHD-STPPR |
| Genine 4 to home/away bypass | 10-4388 | GNE4-HA BYPASS |
| Genine 0 to guard rail ESE | 10-4451 | GNE0-GRDRAIL_ESE |
| Guard rail lock | 10-4467B | |
| Guard rail to Genine 0 | 10-4468 | |
| Genine 0 to y-axis home/away | 10-4681 | |
| Relay I/O | 10-4703 | |
| Solenois drive 0, Genine 1 outputs | 10-4706 | |
| Photo interrupter cable assembly, slotted | 10-4733 | Replaces 10-4273. See FCO E449. |
| Inverter control | 10-4735 | |
| Contactor coil | 10-4745 | |
| Motor wiring | 10-4746 | |
| Bulkhead to bulkhead left/righside estop circuit | 10-4891 | BLKHD-BK L/RSIDE ESTOP CCT |
| MCU estop to bulkhead estop circuit | 10-4892 | MCU ESTOP-BLKHD ESTOP CCT |
| Left estop switch estop circuit | 10-4896 | |
| Center back estop circuit | 10-4897 | |
| Right estop switch estop circuit | 10-4898 | |
| Keyswitch to ESE | 10-4905A | &KEYSW-ESE |
| Table solenoid to ESE | 10-4906 | TABLSOL-ESE |
| Conveyor drop leaf | 10-4914 | |
| Right side estop circuit | 10-4920 | |
| Left side estop circuit | 10-4921 | ECO E297 |
| Base estop jumper | 10-4943 | |
| Resistive brake, relay to PDB | 10-4972 | ECO E318 |
| Resistive brake, ground | 10-4976 | ECO E318 |
| External alarm | 10-4983 | |
| External alarm extension | 10-4984 | |
| Safety loop adapter | 10-4993 | ECO E297 |