Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Description | Fixes and Features | Install Time and Order | Limitations | Dependencies | Workflow Compatibility
Note: The CD for this controlled release was originally sent out containing Service Shell version 2.4 instead of 2.4 SP1. The new version of the CD (21-0143E) corrects this error.
CD: 21-0143E (link points to CD files on Production's master server). Order the CD from CD.Requests@Creo.com
| Component | Version | Release Notes |
|---|---|---|
| Print Console | 2.2.4.12 | Print Console 2.2 Release Notes |
| Service Shell | 2.4 SP1 | Service Shell V2.4SP1 Release Notes |
| VAL MPE firmware* | 2.00 | MPE 2.00 release notes |
| *Due to a problem with the slip sheet counter not resetting to zero on the old-style SSR units, we recommend NOT upgrading to MPE firmware version 2.00 on machines with serial numbers BA112 and earlier. Stay with Version 1.15 or 1.18 until the next release is ready.
This is not an issue for Trendsetter VLF Autoloaders from BA113 on. They should all have MPE firmware v2.00 installed.
Exception: If an older VLF TS Autoloader requires MPE firmware v2.00 to support V2.8 speed imaging, P33 imaging, the Delicate Media (DM) Picker option or the Processor Interface option, then a SSR bag sensor kit will need to be installed (P/N 512-00065A). |
||
| Thermal Head 1 firmware | 1.83 | TH1.x 1.83 release notes |
| PDB/Genine BBR firmware | 1.03 | BBR 1.03 release notes |
| PDB/Genine Recovery firmware | 1.00 | Recovery 1.00 release notes |
| PDB/Genine Boot firmware | 1.09 | Boot 1.09 release notes |
| PDB Main firmware | 1.16 | PDB 1.16 release notes |
| Genine Main firmware | 1.16 | Genine 1.16 release notes |
| Version config file | TS VLF AL (MPE).INI | |
Part number: 20-0196D-A
For general information about controlled releases, see the FAQ for Controlled Releases.
The purpose of this controlled release is to enhance functionality by releasing MPE firmware 2.00.
MPE firmware 2.00 fixes the following issues found in 1.20:
Install in the order given. Total time - 5.35 hours (minimum).
Review the Dependencies before beginning. Also
for more information, see the release notes for
each component.
| Task | Time |
|---|---|
Install Service Shell - needed for
checking head/mpe/mce f/w versions and for downloading the new f/w.
|
0.1 hour |
| Upgrade firmware, including checking head, MPE and satellite f/w versions; backup NVS parameters - fsave all; nvs dump; download new mpe f/w; nvs upgrade; checking nvs parameters | 2.5 hour |
| Upgrade Print Console | 0.25 hour |
| Check that device and all applications are functional including load/unload of small/medium/large size media | 1.5 hours |
| Demo and provide instructions of changes to customers | 1 hour |
Workflow items are not part of this release, but have been tested for compatibility.