Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS


Parts - Sensors and Switches

L-Conveyor
Multiple Cassette Unit (MCU)
Picker
Single Cassette Unit (SCU)
Slip Sheet Removal (SSR)
Straight Conveyor
Trendsetter

L-Conveyor

Item Stored Service Parts Reference Diagrams Notes
Plunger SPST, 16A, 250VAC 15-3355   Conveyor interface panel (2)
Reflective photo sensor 36-3210   L-conveyor plate in/out (plate onto table; plate off table) (3)
Replaces sensor 36-3141 (ECO CA01471)

 

Multiple Cassette Unit (MCU)

Item Stored Service Parts Reference Diagrams Notes
Abort switch 10-1338A    
Roller lever micro switch 15-3135   MCU cassette locked (4)
MCU cassette to chariot lock
Omron switch 15-3263   MCU operator access panel Omron switch
MCU service panel Omron switch
Plunger, SPST, 16A, 250VAC 15-3355   MCU cassette to picker (3)
MCU roof panel (5)
Connector terminator, 22-16AWG, #6 stud 16-3858    
Reflective photo sensor 36-3210   MCU cassette door open/close (4)
MCU picker door open
MCU forklift level (4)
MCU chariot position (3)
Replaces sensor 36-3141 (ECO CA01471)
Fork position sensor assembly 50-2108    
Reflective sensor 50-2138    
Chariot safety switch 50-2153    

 

Picker

Item Stored Service Parts Reference Diagrams Notes
Reflective photo sensor 36-3210   Replaces sensor 36-3141 (ECO CA01471, CA07512)
Sensor with plug 10-9048A DWG  
Sensor w/cable, GNE2-SSSENS
(for slip sheet detection)
10-4389B BOM Used on DM picker
Replaces sensor 36-3141 (ECO CA01471, CA07512)
Sensor, reflect mod 36-3210  
Sensor, photo inter 10-4733A DWG
Sensor, photo inter 10-9048A DWG
Plunger switch 15-3355  

 

Single Cassette Unit (SCU)

Item Stored Service Parts Reference Diagrams Notes
Reed switch sensor, NO, 200-250VDC 10-5065A DWG Replaces 15-3063 on the garage. The 15-3063 sensor had its pin connector glued into the main body of the sensor. This connector had a tendency to separate and break the pin contacts within the sensor, sometimes causing a very intermittent failure.
The 10-5065 sensor has 110 mm of wire between the sensor body and the connector, greatly reducing the stress on the pins.
15-3063 and 10-5065 - click to enlarge
Plunger SPST, 16A, 250VAC 15-3355   SCU cassette to picker (3)
Reed switch actuator magnet 59-3141   Long and short covered cassettes

 

Slip Sheet Removal (SSR)

Item Stored Service Parts Reference Diagrams Notes
slipsheet bin full 10-4652A    
SSR door safety Omron switch 15-3263    
Plunger SPST, 16A, 250VAC 15-3355   Used for SSR roller close. Connects to cable 10-5226A  DWG
Photo reflective sensor, modulated 36-3210   Used for SSR roller open. Connects to cable 10-5248A  DWG
Replaces sensor 36-3141 (ECO CA01471)
Photo reflective sensor 36-3199    
Safety switch acuator, 90deg 59-3441    
Slipsheet underside (bottom) sensor 36-3205   Part of assembly 50-2283C
Up sensor 57-9064    
Up sensor tab 57-9063    

 

Straight Conveyor

Item Stored Service Parts Reference Diagrams Notes
Straight conveyor plate in/plate out 10-4604    
Plunger SPST, 16A, 250VAC 15-3355   Conveyor interface panel (2)

 

Trendsetter

Item Stored Service Parts Reference Diagrams Notes
Guard rail abort switch (2) 10-1338A    
P-cups home
Unload finger home
X-axis home/away (2)
X-axis safe zone (2)
Y-axis home/away (2)
10-4273   This part will become obsolete Nov 22, 2001. It is replaced with 10-4733. See FCO E449.
Guard rail push button 10-4466A    
Opto Sensor, slotted aperture 10-4733A DWG Replaces 10-4273.
Elec SIO Keyswitch 11-0804 BOM  
Elec Start Button 10-4919A DWG  
Autoloader circuit breaker 15-3146    
Plunger SPST, 16A, 250VAC 15-3355   Table drop leaf (2)
Power on/off 15-3399    
Guard rail lock 15-3423    
Autoloader on/off 15-3427    
Table down (4)
Table up (4)
15-3355    
Omron Switch 15-3263   Installed on machines B222 and later
Omron switch key 50-1778   For service use only. Do not send to a customer.


    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.