| Variables | temperature | The laser diode setpoint temperature from 10 to 25 degrees C. |
| Description | Configure the laser diode setpoint temperature. The laser diode setpoint temperature will default to 25 degrees C but can be temporarily modified by the monitor command ldd setpoint <temperature>. | |
| Note that exposure head hardware version 3+ and WLP firmware version B+ is required to support the laser diode setpoint temperature. | ||
| Notes | Thermal 1.0 / 1.7x equivalents: | |
| ||
| Related Documents |
COMMAND: ldd mode (calibrate|monitor|power|retrace|suspend|current|simulate|reset|_standby|off) [<setpoint>] | |
|
COMMAND: ldd info | ||
|
COMMAND: ver | ||
|
ERRORCODE: [02336] The transmission of WLP burst data is not supported | ||
|
PARAMETER: ldd wlpsetpoint | ||