|
|
|
|
Displays system information as follows:
|
|
| SYS: Primary System State=<Primary System State>
|
|
| SYS: Secondary System State=<Secondary System State>
|
|
| SYS: Anneal State=<Anneal State>
|
|
| The system state is set by the monitor commands sys head standby, sys plot (init|start|pause|restart|stop|abort), sys laser [on|standby|off|anneal], sys stroke cal, sys focus (learn|adjust|on|off), sys edge [standard|featureless|off] and sys head position (automatic|manual on|manual off|install on|install off). The primary system state is one of the following:
|
|
|
- Idle
- Diagnostics In Progress
- Prepare To Plot
- Plot In Progress
- Position Manual
- Position Install
- Shutdown Fault
- Fatal Fault
|
|
| The secondary system state is one of the following:
|
|
|
- Write Laser Off / Focus Off
- Write Laser Off / Focus Learn In Progress
- Write Laser Off / Focus Adjust In Progress
- Write Laser Off / Edge Standard In Progress
- Write Laser Off / Edge Featureless In Progress
- Write Laser Off / Focus Learn
- Write Laser Off / Focus Adjust
- Write Laser Off / Focus On
- Write Laser In Progress / Focus Off
- Write Laser In Progress / Focus Learn
- Write Laser In Progress / Focus Adjust
- Write Laser In Progress / Focus On
- Stroke Calibration In Progress / Focus Off
- Stroke Calibration In Progress / Focus Learn
- Stroke Calibration In Progress / Focus Adjust
- Stroke Calibration In Progress / Focus On
- Recalibration In Progress / Focus Off
- Recalibration In Progress / Focus Learn
- Recalibration In Progress / Focus Adjust
- Recalibration In Progress / Focus On
- Write Laser On / Focus Off
- Write Laser On / Focus Learn In Progress
- Write Laser On / Focus Adjust In Progress
- Write Laser On / Edge Standard In Progress
- Write Laser On / Edge Featureless In Progress
- Write Laser On / Focus Learn
- Write Laser On / Focus Adjust
- Write Laser On / Focus On
- Write Laser Anneal / Focus Off
- Write Laser Standby / Focus Off
|
|
| The anneal state is set by the monitor commands sys plot (init|start|pause|restart|stop|abort) and sys laser [on|standby|off|anneal]. The anneal state is one of the following:
|
|
|
- Plot in Progress / Write Laser On / Polarity High
- Plot in Progress / Write Laser On / Polarity Low
- Plot in Progress / Write Laser Off / Polarity High
- Plot in Progress / Write Laser Off / Polarity Low
- Plot Idle / Write Laser On / Polarity High
- Plot Idle / Write Laser On / Polarity Low
- Plot Idle / Write Laser Off / Polarity High
- Plot Idle / Write Laser Off / Polarity Low
|
Thermal 1.0 / 1.7x equivalents:
|
|
|
- The monitor command sys info does not have an equivalent.
|
|
| Thermal 2 equivalents:
|
|
|
- The monitor command sys info is comparable to sys info.
|
COMMAND: sys head standby
|
|
|
COMMAND: sys plot (init|start|pause|restart|stop|abort)
|
|
|
COMMAND: sys laser [on|standby|off|anneal]
|
|
|
COMMAND: sys stroke cal
|
|
|
COMMAND: sys focus (learn|adjust|on|off)
|
|
|
COMMAND: sys edge [standard|featureless|off]
|
|
|
COMMAND: sys head position (automatic|manual on|manual off|install on|install off)
|
The monitor command sys info does not correspond to an API function in the CEH API document.
|