Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [06422] The beam piston is invalid

Error details

Thermal3 Errorcode: [06422] The beam piston is invalid
Thermal3 Errorcode
[06422] The beam piston is invalid

Service Information The monitor command bbs balance (master|slave) (high|low) <piston> will perform a beam-balance ( master / slave ). This error code indicates the beam piston is invalid.

Note that the beam piston for the master profile must be greater than the beam piston for the slave profile.

Operator Action Verify the previous monitor command and enter a valid beam piston.

Causes
  • The beam piston is invalid.
  • The beam piston for the master profile is not greater than the beam piston for the slave profile.

Related Documents COMMAND: bbs balance (master|slave) (high|low) <piston>

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:29 2008
Updated: Wed Jul 16 04:52:19 2008
Module: BBS

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.