Thermal 3 Errorcode: [04411] The sample data is preventing a linear fit


Service Information	Setup of the beam-pointing controller(s) includes an algorithm to acquire A/D samples while either increasing or decreasing the piezo voltage. The resulting sample data should be linear in nature and can be used to calibrate a variety of parameters. This error indicates that a linear fit cannot be calculated for the sample data acquired from the beam-pointing sensors.
Operator Action	Call service.
Causes	Insufficient signal from the beam-pointing sensors. A hardware failure is corrupting the A/D samples. Firmware error that will occur during firmware development and testing.
Related Documents	COMMAND: bpd setup [(a\|b)]
	COMMAND: bpd characterize [(a\|b)]
	COMMAND: bpd cal diffsensor