Thermal 3 Errorcode: [00802] Flash address invalid


Service Information	Addresses are specified in number of bytes but must be word aligned.
	For Head Controller versions 1.0- there are two flash sections. The main section is 4Mx8. Therfore valid addresses for this section are even numbers from 0h to 3FFFFEh. The extended section is 32Mx8. Therfore valid addresses for this section are even numbers from 0h to 1FFFFFEh.
	For Head Controller versions 2.0+ there is one flash section. This main section is 32Mx8. Therfore valid addresses for this section are even numbers from 0h to 1FFFFFEh.
	This error indicates that an attempt was made to access the flash memory where the flash address is invalid.
Operator Action	Verify the previous monitor command and enter a valid flash address.
Causes	The flash address is invalid.
Related Documents	COMMAND: fls erase (main\|extended) <address> <length>
	COMMAND: fls write (main\|extended) <address> <value>
	COMMAND: fls read (main\|extended) <address> <length>