Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Thermal 3 Errorcode: [07404] The command code is not supported

Error details

Thermal3 Errorcode: [07404] The command code is not supported
Thermal3 Errorcode
[07404] The command code is not supported

Service Information The header of all received datalink packets contains a command code that is used to identify the datalink packet. This error indicates that the specified command is not supported.

Operator Action Call Service.

Causes
  • The functionality is not supported by the exposure head.
  • Firmware error that will occur during firmware development and testing.

Related Documents ERRORCODE: [07402] The command packet is invalid
ERRORCODE: [07403] The command packet length is invalid
ERRORCODE: [07405] The command parameter is invalid

Applies to: THERMAL3
Modified: Wed Jul 16 04:28:34 2008
Updated: Wed Jul 16 04:52:19 2008
Module: HIF

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.