Thermal 3 Errorcode: [02010] The parameter element is invalid


Service Information	When the parameter subsystem registers the table of parameters from other subsystems, the number of elements for each parameter can also be specified. This error indicates that the user has specified an invalid element.
	If the subsystem specifies one element for one of the parameters, the user must not specify the element when accessing the parameter. For example, the light valve driver subsystem specifies one element of the stroke offset parameter. Thus the user must not specify the element.
	If the subsystem specifies multiple elements for one of the parameters, the user must specify the element when accessing the parameter. For example, the media subsystem specifies 120 elements for the stroke table. Thus the user will specify elements from 0 to 119.
Operator Action	Verify the previous monitor command and enter a valid element.
Causes	The element is invalid.
Related Documents	COMMAND: set <subsystem> [<copy>] <parameter> [(<element>\|all)] <value>