Thermal 3 Errorcode: [05607] The control mode is invalid


Service Information	The monitor command sys laser [on\|standby\|off\|anneal] will set the write laser control mode. The write laser control mode can be one of the following:
	On Standby Off Anneal
	The monitor command sys focus (learn\|adjust\|on\|off) will set the focus control mode. The focus control mode can be one of the following:
	Learn Adjust On Off
	The monitor command sys edge [standard\|featureless\|off] will set the edge detect control mode. The edge detect control mode can be one of the following:
	Standard Featureless Off
	The monitor command sys head position (automatic\|manual on\|manual off\|install on\|install off) will set the exposure head installation control mode. The exposure head installation control mode can be one of the following:
	Automatic Manual On Manual Off Install On Install Off
Operator Action	Verify the previous monitor command and enter a valid write laser, focus, edge detect or exposure head installation control mode.
Causes	The write laser, focus, edge detect or exposure head installation control mode is invalid.
Related Documents	COMMAND: sys laser [on\|standby\|off\|anneal]
	COMMAND: sys focus (learn\|adjust\|on\|off)
	COMMAND: sys edge [standard\|featureless\|off]
	COMMAND: sys head position (automatic\|manual on\|manual off\|install on\|install off)