Thermal 3 Errorcode: [05653] Satellite fault(s) have been masked


Service Information	The exposure head will monitor a variety of satellite faults ( voltages, communications, etc ) and shutdown the exposure head if required. To allow operation of the exposure head to continue, the user can mask any combination of satellite faults to prevent the exposure head from being shutdown. This error code is an informational message ( generated at the start of every plot ) reminding the user that satellite faults have been masked in the exposure head.
	It is undesireable to mask satellite faults. Masking a satellite fault implies that there is a hardware failure in the exposure head. Regardless, the underlying problem should be fixed; not masked.
	Note that the monitor command sat status will display the satellite faults and the monitor command sat mask (on\|off) <index> will configure the fault mask's.
	Note that this error code is also returned to the host as an unsolicited warning fault.
Operator Action	Re-enable all satellite faults that have been masked in the exposure head.
Causes	System monitoring of at least one satellite fault has been masked in the exposure head.
Related Documents	COMMAND: sat status
	COMMAND: sat mask [(on\|off) <index>]