|
|
|
|
Configures the maximum allowable error for the internal balance. The maximum allowable error will cause the internal balance to fail for two possible reasons.
|
|
| First, the internal balance will determine the pulse heights at the maximum light level and the minimum light level. The target profile is calculated based on the beam slope, beam curve and scorr table for the selected media. If the range of pulse heights prevents achieving the target profile within the maximum allowable error, then the internal balance fails.
|
|
| Second, the internal balance will perform a coarse balance and calculate the pulse heights. If the profile error ( the target profile minus the pulse heights at the coarse balance ) exceeds the maximum allowable error, then the internal balance will perform a fine balance and re-calculate the pulse heights. If the profile error ( the target profile minus the pulse heights at the fine balance ) exceeds the maximum allowable error after six fine balance iterations, then the internal balance fails.
|
Real
|
2.000 %
|
0.000 to 100.000 %
|
COMMAND: ibs balance [nocal]
|
|
|
ERRORCODE: [07616] Internal balance prevented by the range of pulse heights
|
|
|
ERRORCODE: [07617] Internal balance prevented by drift errors
|
|
|
ERRORCODE: [07618] Internal balance error exceeds the maximum error
|