Thermal 3 Errorcode: [07616] Internal balance prevented by the range of pulse heights


Service Information	The internal balance determines the stroke profiles at the maximum pixel level and the minimum pixel level. A target profile is then calculated based on the NVS parameters med <media index> beamslope <polarity>, med <media index> beamcurve <polarity>, med <media index> beampiston, med <media index> scorr <polarity / spot quad> and the stroke profiles. This error indicates that the range between the stroke profiles at the maximum pixel level and the minimum pixel level is insufficient to meet the requirements of the target profile.
	Enabling the verbose information for the internal beam-balance sensor subsystem will display the stroke profiles at the maximum pixel level and the minimum pixel level and the target profile.
	Typically the internal balance will succeed if the NVS parameter ibs maximumerror is increased or the NVS parameters med <media index> beamslope <polarity>, med <media index> beamcurve <polarity> or med <media index> beampiston are decreased.
Operator Action	Call service.
Causes	The stroke profile does not provide sufficient range to meet the requirements of the target profile.
Related Documents	COMMAND: ibs balance [nocal]
	COMMAND: vbs enable (<subsystem>\|all) <level>
	PARAMETER: ibs maximumerror
	PARAMETER: med <media index> beamslope <polarity>
	PARAMETER: med <media index> beamcurve <polarity>
	PARAMETER: med <media index> beampiston
	PARAMETER: med <media index> stroke <polarity / spot quad>
	PARAMETER: med <media index> scorr <polarity / spot quad>