Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Problems downloading? More...
If your file does not open correctly after downloading: breaks in data transmission during file transfers are common when network traffic is high. A break and subsequent restart may cause an error at the restart point, which results in a corrupt transfer. The end result is a file that does not open or run correctly. For example, *.exe files may not run, *.pdfs may not open, and *.zip files may be reported as invalid archives. The simplest solution is to retry downloading the file. If the problem persists, try to download the file when network traffic is lighter.
| Application | Description | Download |
| Prinergy Update Utility (PPU)
(06 Jul 2004) |
Before downloading any 2.3 major or minor updates, the latest version of the PPU must be installed. For more information see FAQ: Prinergy Update Utility (PPU). Note: To install or remove any major or minor update using this PPU, the Prinergy system must be in Maintenance Mode. Placing the system in Maintenance Mode prevents backups from running while you are installing/removing updates. |
Prinergy Update Utility |
| PUpdate.exe
(06 Jul 2004) |
PUpdate.exe, the Prinergy update application, is the software used for upgrading to Prinergy 2.3 and applying major and minor updates. | Prinergy Update application |
| PreCheck.exe | PreCheck.exe, the Prinergy Pre-Installation Requirement Check application, alerts the customer to potential conflicts that they should take care of before attempting to apply the Prinergy 2.3 upgrade. PreCheck.zip includes the PreCheck.exe and PreCheck.py files. | Prinergy PreCheck application |
| Major Upgrade | Description | Download |
| 2.3.1.0
(06 Jul 2004) |
For details about this major upgrade, see the Prinergy 2.3.1.0 Readme. | Prinergy 2.3.1.0 Major Upgrade |
| Minor Update | Description | Download |
| 2.3.1.5 (23 Sept. 2005) |
For more details about this minor update, see the Prinergy 2.3.1.5 Readme. | Prinergy 2.3.1.5 Minor Update |
| 2.3.1.4 (28 April 2005) |
For more details about this minor update,
see the Prinergy 2.3.1.4
Readme. Note: Do not upgrade Prinergy or Prinergy Evo sites connected to Veris 1.6 until updated Veris software is available The Certified Process option in Prinergy 2.3.1.4, 3.0.2.2, and Prinergy Evo 3.0.0.53 does not work with Veris 1.6.904 and earlier. Do not upgrade sites to this configuration until an updated Veris software version is available. This software is expected to be available Aug. 3, 2005, and will require a service call. For more information on the issue, see the Creo Certified Process for Proofing in Creo Workflows document on the Veris Connectivity page. | Prinergy 2.3.1.4 Minor Update |
| 2.3.1.3 (04 Feb 2005) |
For more details about this minor update,
see the Prinergy 2.3.1.3
Readme.
Note 3: Users of Pentium 3-based Primary or Secondary servers (Dell 6400, 4400 and 2500): We have recently discovered a potential problem that you might experience with Prinergy 2.3.1.3. The symptom is that the Primary or Secondary server completely locks up -- the display freezes and the keyboard and mouse become unresponsive. You need to reset the server using the front panel switch. Renderstations do not seem to be affected, nor do other hardware platforms (e.g. Dell 2600, 700). This problem is the highest priority for the Workflow team at Creo and we have people here, at Dell and Microsoft working together to solve it. | Prinergy 2.3.1.3 Minor Update |
| 2.3.1.2 (20 Oct 2004) |
For more details about this minor update, see the Prinergy 2.3.1.2 Readme. | Prinergy 2.3.1.2 Minor Update |
| 2.3.1.1 (20 Aug 2004) |
This update includes the Imposed Vector Output fix and replaces the 2.3.1.1 update posted on July 28. Note that for the following devices, a direct connection to the 3016 RIP is not supported: Heidelberg Hercules, Primesetter, Quasar, Signasetter, Topsetter and Speedway Engine Manager. These devices will be supported in 2.3.1.2. For more details about this minor update, see the Prinergy 2.3.1.1 Readme. | Prinergy 2.3.1.1 Minor Update |
| Name | Description | Download |
| Creo Distiller Assistant | This plug-in adds extra functionality to Adobe’s Acrobat Distiller via a PostScript startup file. See the Kodak Distiller Assistant (also bundled with the download) for more information. | Mac version Windows version |
| Acrobat 7.0 Plug-ins | This section contains download files for Acrobat 7.0 PDF Compare and PDF Merge Plug-ins. | Mac Version Windows Version |
| Acrobat 7.0 Plug-ins |
This section contains information about Acrobat 7.0 plug-ins for Prinergy users for Geometry Editor, Separation Repair Tool, View Accelerator, Preflight Locator, CreoToolsPro (Trap Editor, DotShop and Separations Viewer). For detail information, see the Prinergy Acrobat Plug-ins for Adobe Acrobat 7.0 technical bulletin. Installing the Prinergy Adobe Acrobat 7.0 plug-ins on Mac:
Installing the Prinergy Adobe Acrobat plug-ins on PC:
|
Acrobat 7 Plug-in (Mac) Acrobat 7 Plug-in (PC) |
| Name | Description | Download |
| Traditional Chinese | AdobeMingStd-Light.ps. For use with Adobe CPSI 3016 RIP. Download .zip file and open with WinZip. | TraditionalChinese.zip |
| Simplified Chinese | AdobeSongStd-Light.ps. For use with Adobe CPSI 3016 RIP. Download .zip file and open with WinZip. | SimplifiedChinese.zip |
| Full Japanese Updated 16 Jul 2004 |
Deluxe_kanji23.ps. For use with Adobe CPSI 3016 RIP. Download .zip file and open with WinZip. | FullJapanese.zip |
| Basic Japanese Updated 16 Jul 2004 |
Standard_kanji5.ps. For use with Adobe CPSI 3016 RIP. Download .zip file and open with WinZip. | BasicJapanese.zip |
| Korean Updated 16 Jul 2004 |
AdobeMyungjoStd-Medium.ps. For use with Adobe CPSI 3016 RIP. Download .zip file and open with WinZip. | Korean.zip |
| Name | Description | Download |
| Kodak System Check Tool | The Kodak System Check Tool collects all software and system information and attaches this information to an escalation call. The tool can be used by customers or Kodak personnel. The Kodak System Check Tool will be included in Prinergy 3.1.0.5 and later and can be used with older versions of Prinergy. The System Check Tool Technical Bulletin explains how to install and run the tool, how to view the files, and the structure of the HTML and compressed files. | Kodak System Check Tool |
| Nettest tool | Nettest.exe is a fast, first-check tool for measuring network performance between two servers in the same configuration. If a problem is found, further diagnosis can be performed using Netperf.exe (located in the support\bin folder on all Prinergy servers). Nettest.exe will be included in Prinergy 3.1.0.5 and later (in the support\bin folder) and can be used with older versions of Prinergy. | Nettest tool |
| Rehosting a Primary Server ZIP file | This ZIP file contains the scripts and utilities necessary to complete the rehosting procedure as described in Rehosting a Prinergy 2.x Primary Server. | Rehosting a Primary Server ZIP file Updated 26 Oct 2004. |
| lanacfg.exe utility | There is an invalid assumption in our code that eth adapter 0 will always be present in a customer's machines. If the old eth adapter is replaced by a new one, during an upgrade to Prinergy 2.2 for example, the new one may not be assigned number 0 by NetBIOS. You can use the lanacfg.exe utility to rearrange the numbering of the newly installed adapters so that adapter 0 is always present in the system. This will prevent the error message: E ... ExtremeSerialNumberFromMACAddress: NetBios NCBRESET error: rc=35 To use this utility: More...
| lanacfg.exe utility |