Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Dolev 800/800V/800VČ TIC -  Installation
Punch/On-Line Conveyor
Installation

Completion

See FCO17436 -   05/05/93 Light Area Harness
See FCO 17851 -   15/06/93 Manifold installation
See FSB 378 -   19/01/94 Changes on Punch units
See FCO 18908 -   09/03/94 Punch Basket Big R
See -   09/12/96 Dolev 800 Calibration with the Brisque
See -   26/01/97 Dolev 800 Punch Calibration with the Brisque
  1. Reinstall all covers and the on-line processor, if present.

  2. Make a test plot to ensure the Imagesetter is free of light leaks.

  3. Repeat the procedures outlined in Section , Repeatability and Registration, to ensure that the top cover re-installation did not affect the punch system.

Reminder: Add all installation paperwork (e.g., Punch Film Layout Forms, Customer-approved Layout, Order List, etc.) to the on-site Dolev technical folder. Be sure to include handwritten calculations.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.