Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Dolev 800/800V/800VČ TIC -  Installation
Punch/On-Line Conveyor
Installation

Compatibility Verification/Upgrade

See FCO17436 -   05/05/93 Light Area Harness
See FCO 17851 -   15/06/93 Manifold installation
See FSB 378 -   19/01/94 Changes on Punch units
See FCO 18908 -   09/03/94 Punch Basket Big R
See -   09/12/96 Dolev 800 Calibration with the Brisque
See -   26/01/97 Dolev 800 Punch Calibration with the Brisque

Refer to:    Dolev 800 Software Version 4.0x Release Document, CreoScitex No. 793-8F278

  1. Check that the Imagesetter identification is of the 800P series.

  2. Check that Dolev 800P software version 4.0x (or higher) is loaded.

  3. Ensure that the correct plotter update is loaded:

    - For the Whisper, plotter update PLT_UPDT_03R.
    - For the Dolev/PS, plotter update TBD.

  4. Turn off the Imagesetter.

Note: Do not perform any NVM updates prior to punch installation. Required updates will be performed later.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.